Hello
I read in some websites, that russian lollipop more battery drain, is that true?
and in you experience whats best lollipop in battery and less bloatware?
I read in some websites, that russian lollipop more battery drain, is that true?
and in you experience whats best lollipop in battery and less bloatware?
xda-developers
is it possible to turn this feature off? i don't like it and i keep accidentally swiping left.
xda-developers
I don't know how long this will stay up but if you're needing old versions of the updaters for testing purposes Android File Hosting has a demo site that still has links to old copies of the gapps. I googled a name of an older version of one of the packages and and stumbled across it.
http://demo.androidfilehost.com/?w=files&flid=7987
http://demo.androidfilehost.com/?w=files&flid=7987
xda-developers
Hello i have o problème in m'y GT i9195
Network its not good
Help me please. 4,4,2
When i go tout thé hows nous signal
Sent from my GT-I9195 using XDA Free mobile app
Network its not good
Help me please. 4,4,2
When i go tout thé hows nous signal
Sent from my GT-I9195 using XDA Free mobile app
xda-developers
Where can buy a Galaxy S6 with unlocked bootloader and no service plan? Yes I realize thats 0-0 based on model and yes that is within my budget.
Monthly payments preferred, but I can also do cash up front.
Monthly payments preferred, but I can also do cash up front.
xda-developers
To elaborate on thread title's question. Searching newpower99's site I do not see batteries for Nook HD. However searching 'nook HD battery' on Google pointsto newpower99's page that the site itself says isn't there.
Checkout points to it being a valid product (can't buy right at this minute.) Anyone know what's going on?
Checkout points to it being a valid product (can't buy right at this minute.) Anyone know what's going on?
xda-developers
Hi,
Currently i am struck at a situation where i need to do a fresh install of complete rom. The problem is as below
I own lenovo A6000 which is new in indian market with firmware kraft-A6000. I was frustated with the custom vibe ui given by lenovo and i started to install custom rom. So i booted temporarily into CWM and installed some other lenovo ROM which resulted in disaster. I have restored it back by using the backup taken using CWM. This restoration lead to complete failure of the phones signal reception. I mean literally cell is not able to register to network and catch any signals. So i got little bit frustated and booted into CWM temporarly using ADB and Fastboot and formated system files. (/system). I was aware that it will compelete wipe up the system but one thing which i was not aware that time was i haven't flashed the custom recovery over stock one. So now i am stuck at a point where i cannot install custom ROM zip through stock recovery since signatures and firmware mismatches are happening. I cannot fastboot the phone using debug mode as my stock rom is wiped off completely and my device is unauthorised when i listed it with "adb devices" command. So I came to the conclusion that i need install the stock rom zip using the stock recovery. When i googled for it, i could not find it available and got git-hub link for the same firmware code. So i am hoping to rebuild it into zip and install it using stock recovery.
After good effort of search, i am still left with questions as well as confusions.
1. Is there any way to make my device autherised and make signature check OFF using adb commands so that i can install custom rom -- my guess is probably no, but please confirm
2. I some how got the code of Kraft-A6000 ROM from git-hub and from lenovo site. I would like to know the steps (or any links if already posted) on how to make a zip out of it using linux shell or using eclipse without installing android sdk studio. (i am a bit skeptical as i saw in some of the xda forums stating the code is not building properly as it is missing some files but just wanted to give it a try myself)
3. If any pre-loading methods exist that factories use to install android for first time please suggest.
My last option is to go for a lenovo service center and check with them if they can get it back working but i really want to give it a complete try before going to them.
Note: i am not a core linux user and to my knowledge i tried my level best to resolve the issue myself. Please do also let me know if any extra information is needed. Any help on this is highly appreciated.
Currently i am struck at a situation where i need to do a fresh install of complete rom. The problem is as below
I own lenovo A6000 which is new in indian market with firmware kraft-A6000. I was frustated with the custom vibe ui given by lenovo and i started to install custom rom. So i booted temporarily into CWM and installed some other lenovo ROM which resulted in disaster. I have restored it back by using the backup taken using CWM. This restoration lead to complete failure of the phones signal reception. I mean literally cell is not able to register to network and catch any signals. So i got little bit frustated and booted into CWM temporarly using ADB and Fastboot and formated system files. (/system). I was aware that it will compelete wipe up the system but one thing which i was not aware that time was i haven't flashed the custom recovery over stock one. So now i am stuck at a point where i cannot install custom ROM zip through stock recovery since signatures and firmware mismatches are happening. I cannot fastboot the phone using debug mode as my stock rom is wiped off completely and my device is unauthorised when i listed it with "adb devices" command. So I came to the conclusion that i need install the stock rom zip using the stock recovery. When i googled for it, i could not find it available and got git-hub link for the same firmware code. So i am hoping to rebuild it into zip and install it using stock recovery.
After good effort of search, i am still left with questions as well as confusions.
1. Is there any way to make my device autherised and make signature check OFF using adb commands so that i can install custom rom -- my guess is probably no, but please confirm
2. I some how got the code of Kraft-A6000 ROM from git-hub and from lenovo site. I would like to know the steps (or any links if already posted) on how to make a zip out of it using linux shell or using eclipse without installing android sdk studio. (i am a bit skeptical as i saw in some of the xda forums stating the code is not building properly as it is missing some files but just wanted to give it a try myself)
3. If any pre-loading methods exist that factories use to install android for first time please suggest.
My last option is to go for a lenovo service center and check with them if they can get it back working but i really want to give it a complete try before going to them.
Note: i am not a core linux user and to my knowledge i tried my level best to resolve the issue myself. Please do also let me know if any extra information is needed. Any help on this is highly appreciated.
xda-developers
A painful experience - see below - taught me that a NANDROID backup isn't enough.
I had to find a PIT file, a bootloader and a modem.
What else does one need to be able to get back to an earlier version, and is there some software to do that
automatically?
I've tried an Android-5.0 for which I had to flash the boot loader and the modem, as well.
The Android-5.0 system booted well but it turnt out that I got insurmountable difficulties with WLAN
authentication. Therefore I wanted to go back to Kitkat (4.4.2) which I had backed up by TWRP.
I could restore the system but got a boot loop - no wiping helped.
Then I tried to install a stock 4.4.2 system but ODIN-3.09 has stalled for more than an hour such that I had
to kill it. Now my device was broken. Luckily I did find a suitable PIT file, boot loader and modem.
Even then ODIN didn't succeed. With the help of Philz-Touch-Recover I could reformat some partitions.
Only after that ODIN succeeded - together with the PIT file - to flash the bootloader and the modem,
Only now, I could boot into the old version.
Many thanks for a hint,
Helmut.
I had to find a PIT file, a bootloader and a modem.
What else does one need to be able to get back to an earlier version, and is there some software to do that
automatically?
I've tried an Android-5.0 for which I had to flash the boot loader and the modem, as well.
The Android-5.0 system booted well but it turnt out that I got insurmountable difficulties with WLAN
authentication. Therefore I wanted to go back to Kitkat (4.4.2) which I had backed up by TWRP.
I could restore the system but got a boot loop - no wiping helped.
Then I tried to install a stock 4.4.2 system but ODIN-3.09 has stalled for more than an hour such that I had
to kill it. Now my device was broken. Luckily I did find a suitable PIT file, boot loader and modem.
Even then ODIN didn't succeed. With the help of Philz-Touch-Recover I could reformat some partitions.
Only after that ODIN succeeded - together with the PIT file - to flash the bootloader and the modem,
Only now, I could boot into the old version.
Many thanks for a hint,
Helmut.
xda-developers
Hey everyone!
I'm currently thinking about rooting my T-Mobile Galaxy Note 4 but I have some reservations because of some features and essential applications that I may lose.
Specifically, the task manager that can force quit all programs is essential to me and the stock camera that utilizes the full potential of the Note 4's camera is absolutely terrific. I don't really care for much of the S Pen features that might go array because I can easily download a third party note taking application. As long as I have the essential Google applications, I don't really need much more.
However, I would really like to know what other applications you can recommend that would make a good replacement for the camera, the task manager, IR blaster, etc.
Any other suggestions to make my experience all that better would be awesome! Thank you so much!
I'm currently thinking about rooting my T-Mobile Galaxy Note 4 but I have some reservations because of some features and essential applications that I may lose.
Specifically, the task manager that can force quit all programs is essential to me and the stock camera that utilizes the full potential of the Note 4's camera is absolutely terrific. I don't really care for much of the S Pen features that might go array because I can easily download a third party note taking application. As long as I have the essential Google applications, I don't really need much more.
However, I would really like to know what other applications you can recommend that would make a good replacement for the camera, the task manager, IR blaster, etc.
Any other suggestions to make my experience all that better would be awesome! Thank you so much!
xda-developers
Hello there everybody!
I just recently bought an ASUS ZE551ML 4GB from Taiwan. I came across some small software bugs (that may be fixed in a later version), but what I found pretty "nasty" is a weird interruption of the Cellular Data Connection. The phone uses the new 2.12.40.11 software version (no updates made) & runs inside Europe. Did anyone else come across this issue?
Thanks!
Miron :)
I just recently bought an ASUS ZE551ML 4GB from Taiwan. I came across some small software bugs (that may be fixed in a later version), but what I found pretty "nasty" is a weird interruption of the Cellular Data Connection. The phone uses the new 2.12.40.11 software version (no updates made) & runs inside Europe. Did anyone else come across this issue?
Thanks!
Miron :)
xda-developers
Hello everyone!
My phone got stucked on boot animation when in just rebooted my phone (i really didn't do anything).
I already have tried (A): Flashing a custom recovery and then a rom from there; and (B) a Factory Image with the procedure 1 and 2 from here:
http://forum.xda-developers.com/goog...image-t2513701
I tried to flash KitKat and Lollipop images with both methods and all the roms do the same (Stuck on Boot Animation: Flying dots). Nothing seems to work. I'm really stuck on it. :crying:
My phone is a Nexus 5 Hammerhead D820(H) Baseband M897A-2.0.50.2.25
PD: The power buttons is OK
Edit: When i was writing this, i 'magically' solved it.
1. With my Phone plugged into the pc in Fastboot mode, i made a 'Factory reset'
with the next adb commands:
fastboot erase userdata
fastboot erase cache
2. Then i flashed the Kitkat image.
3. It Works! :D
Hope it would be useful
My phone got stucked on boot animation when in just rebooted my phone (i really didn't do anything).
I already have tried (A): Flashing a custom recovery and then a rom from there; and (B) a Factory Image with the procedure 1 and 2 from here:
http://forum.xda-developers.com/goog...image-t2513701
I tried to flash KitKat and Lollipop images with both methods and all the roms do the same (Stuck on Boot Animation: Flying dots). Nothing seems to work. I'm really stuck on it. :crying:
My phone is a Nexus 5 Hammerhead D820(H) Baseband M897A-2.0.50.2.25
PD: The power buttons is OK
Edit: When i was writing this, i 'magically' solved it.
1. With my Phone plugged into the pc in Fastboot mode, i made a 'Factory reset'
with the next adb commands:
fastboot erase userdata
fastboot erase cache
2. Then i flashed the Kitkat image.
3. It Works! :D
Hope it would be useful
xda-developers
My brothers Galaxy Nexus crashed two days ago and rebooted. Since than whenever you boot it again, it boots normally but after about 10 seconds crashes and reboots again. No matter if you unlock it, SIM installed or not, with external power or not makes no difference. Always keeps crashing and rebooting. So the first thing I did was a factory reset within the bootloader. When it restarted nothing was wiped. Wallpaper, unlock code and all apps were still there.
Weird.
So I decided to flash the the whole stock image again. Downloaded the latest version from Google and flashed it. Took a fairly long time (30 minutes), but had no errors or irregularities and had the same result as the factory reset -> nothing. Everything is still there.
How can this even be? The only thing I could imagine is a broke storage. Is this a possibility?
Thanks in advance
Weird.
So I decided to flash the the whole stock image again. Downloaded the latest version from Google and flashed it. Took a fairly long time (30 minutes), but had no errors or irregularities and had the same result as the factory reset -> nothing. Everything is still there.
How can this even be? The only thing I could imagine is a broke storage. Is this a possibility?
Thanks in advance
xda-developers
samsung galaxy s4 zoom C105A "system software not authorized by AT&T ..."
can someone help me fix this problem?
Phone had dowload mode but I can't flash anything, Tried to flash mf3-sys-boot.tar.md5, but got error.
can someone help me fix this problem?
Phone had dowload mode but I can't flash anything, Tried to flash mf3-sys-boot.tar.md5, but got error.
xda-developers
Hello XDA,
I just wanted to know if it would be possible to obtain a plan where I would only be getting data from AT&T for my note 4 and not any sms or calling capabilities. This would be of use to me and many others because I already use google voice to make calls and sms which is free and only requires internet. So buy buying only an internet plan, I could still message and make calls just fine through google voice.
I just wanted to know if it would be possible to obtain a plan where I would only be getting data from AT&T for my note 4 and not any sms or calling capabilities. This would be of use to me and many others because I already use google voice to make calls and sms which is free and only requires internet. So buy buying only an internet plan, I could still message and make calls just fine through google voice.
xda-developers
Hello, is it possible to flash my US-Samsung Galaxy S5 SM-G900T with a german stock-rom SM-G900F DBT ?
Thx :)
Thx :)
xda-developers
Hey other Z1s owners, it looks like our Z1s got lollipop certification before the Z3 on T-Mobile (D6616) :D
Z1s T-Mobile https://www.ptcrb.com/vendor/complet...?modelid=24176
Z3 T-Mobile https://www.ptcrb.com/vendor/complet...?modelid=26399
Z1s T-Mobile https://www.ptcrb.com/vendor/complet...?modelid=24176
Z3 T-Mobile https://www.ptcrb.com/vendor/complet...?modelid=26399
xda-developers
Guys I m new on this site and I have an problem please anyone solve that the
Problem is that I have an lava iris 450+ mobile n there aren't any custom
Roms available for this device can anyone please make any custom ROM for this device I will b very thankful to u
Please brothers help create a Rom for this device or port any ROM for this device
Hope anyone will help
Problem is that I have an lava iris 450+ mobile n there aren't any custom
Roms available for this device can anyone please make any custom ROM for this device I will b very thankful to u
Please brothers help create a Rom for this device or port any ROM for this device
Hope anyone will help
xda-developers
I went back to my GS3, can't seem to find a current phone that suits me right now. I had planned on preordering the S6, but I want to wait it out.
I depend on my GS3 as my daily phone and need a ROM suggestion on 4.4.2 (NE1) that's as smooth and lag-free as possible, good on battery life is also a plus.
And speaking of battery, I was either going to get a battery case like the Mophie or go with an extended battery, nothing huge like 7200 mAh.
Any suggestions on these?
I depend on my GS3 as my daily phone and need a ROM suggestion on 4.4.2 (NE1) that's as smooth and lag-free as possible, good on battery life is also a plus.
And speaking of battery, I was either going to get a battery case like the Mophie or go with an extended battery, nothing huge like 7200 mAh.
Any suggestions on these?
xda-developers
This is fot all the people who just bought the m9 to find HTC Sense TV missing and a horrendous app(my opinion , i do not intend to cause a riot.) , Peel Smart TV has taken its place, this is for you , NO more complaining !
METHOD A: (if tv app is not visible in playstore)
download this app (original unmodified, untampered ) TV.apk from the attachment section. (then update it via playstore)
METHOD A: (if tv app is visible in playstore)
you can try installing the tv app from the playstore.
hope i helped ,(:good:if i did, press the thanks:good:)
sishirbaid.
METHOD A: (if tv app is not visible in playstore)
download this app (original unmodified, untampered ) TV.apk from the attachment section. (then update it via playstore)
METHOD A: (if tv app is visible in playstore)
you can try installing the tv app from the playstore.
hope i helped ,(:good:if i did, press the thanks:good:)
sishirbaid.
xda-developers
Hi guys, I'm searching for a rom which works great with games, any ideas?
xda-developers
Why not more development for this line? There is like 3 ROMs and 1 Kernel. Apps section is a ghost town as well. Really surprised at the lack of overall involvement, from devs and user alike. Exynos related? Too many variants? Or just too many tablets being released...idk
xda-developers
I didn't find it anywhere?
help
help
xda-developers
I don't know about anyone else, but I don't like the color of the new keyboard. It would be great if someone would make a mod to change the color of the keyboard. If I knew how I would, but I'm rather new to the Android modding world.
Sent from Hal's HTC One M9
Sent from Hal's HTC One M9
xda-developers
Hi I need some help guys, my Moto G XT1032 was stuck on the bootloader unlocked screen so I wiped it using CWM. Now I have no OS and I'm struggling to put an OS onto it due to the message can't mount sdcard coming up repeatedly aswell as cant mount data and others. I switched to TWRP but it did not change anything. I was on 5.0.2 CM ROM before. I can boot into fastboot mode and also recovery,
Any help would be greatly appreciated!
Any help would be greatly appreciated!
xda-developers
Hi,
I'm from Argentina and I'll be in USA in a few days.
Can someone tell me what are the bands supported in the S6 Edge AT&T version?
My carrier in Argentina uses LTE Band 4 AWS. And I think the only US carrier that uses that band is AT&T.
Thanks!
PS: Sorry for my english
I'm from Argentina and I'll be in USA in a few days.
Can someone tell me what are the bands supported in the S6 Edge AT&T version?
My carrier in Argentina uses LTE Band 4 AWS. And I think the only US carrier that uses that band is AT&T.
Thanks!
PS: Sorry for my english
xda-developers
I have obtained a Sprint s4 mini. From what I can find, the current kernel is SE secure enforcing.
The exact build number is KOT49H.L520_4.4.2_0016
Build date is Oct 7 2014
I am not new here, I know that all known root methods are now bust. What other options are there?
Searching seems to be pretty difficult for this device. All searches for bootloader and recovery come up for the i9190 / i9195
If I use Kies or Odin to flash a previous recovery image, will that brick the device? Also in the settings, it says Secure Boot Status - Type: Samsung
Guess that is referring to the Knox enforcing
The particular image I had in mind to flash with Odin is SPR-L520VPUAMK2-20131115204826
Will it work? Or am I screwed?
The exact build number is KOT49H.L520_4.4.2_0016
Build date is Oct 7 2014
I am not new here, I know that all known root methods are now bust. What other options are there?
Searching seems to be pretty difficult for this device. All searches for bootloader and recovery come up for the i9190 / i9195
If I use Kies or Odin to flash a previous recovery image, will that brick the device? Also in the settings, it says Secure Boot Status - Type: Samsung
Guess that is referring to the Knox enforcing
The particular image I had in mind to flash with Odin is SPR-L520VPUAMK2-20131115204826
Will it work? Or am I screwed?
xda-developers
I dont know how to see call duration history?
xda-developers
Hi all, I have a tricky problem, I converted my M7 to GPE following this thread "[RUU] Google Edition Conversion. 5.0.1 RUU Zip pre-rooted/non-rooted + firmware ". All went fine but in the end the GPE lacks some stuff that I really like on Stock. Long story short I wanted to go back to stock, so I followed the part in the thread refffering to GPE => Stock
I just forgot before the last fastboot reboot to change the CID from 11111111 to my cid.
I flashed the 7.19.401.2-FULL_STOCK_WIPE.zip using 1.44 Hboot. Now it is stuck at the HTC logo afterwards and keeps rebooting, and ends up in stock recovery the phone with the red triangle and exclamation sign.
I did a factory reset from fastboot and now i get the phone with the red triangle. which means it is in the stock recovery but something is wrong. I can manage it to put it in fastboot, but that is all.
Windows each time I connect the phone is no longer recognizing the device so adb fails (I assume because it is the wrong CID). It just says waiting for device and nothing happens further.
How do I change the CID if I cannot connect the device? Tricky ... I tried several adb drivers (I use win 8.1) like "minimal_adb_fastboot_v1.2_setup" and "Universal_Naked_Driver_0.72" . The best I got is a driver installed and showing in device manager but with message "Universal_Naked_Driver_0.72".
Any help is really appreciated.
Best regards
Quote:
Prerequsites: S-off 1.44 HBoot RUU for your device (I used ) Ok I thought reversing since I had S-off would be a simple affair and maybe I took a misstep along the way but I got it done. Here's what worked FOR ME. 1) set CID to superCID 2) install the 1.44 Hboot in RUU mode (thanks SneakyGhost) http://d-h.st/qfc 3) install the RUU for your phone/carrier |
I flashed the 7.19.401.2-FULL_STOCK_WIPE.zip using 1.44 Hboot. Now it is stuck at the HTC logo afterwards and keeps rebooting, and ends up in stock recovery the phone with the red triangle and exclamation sign.
I did a factory reset from fastboot and now i get the phone with the red triangle. which means it is in the stock recovery but something is wrong. I can manage it to put it in fastboot, but that is all.
Windows each time I connect the phone is no longer recognizing the device so adb fails (I assume because it is the wrong CID). It just says waiting for device and nothing happens further.
How do I change the CID if I cannot connect the device? Tricky ... I tried several adb drivers (I use win 8.1) like "minimal_adb_fastboot_v1.2_setup" and "Universal_Naked_Driver_0.72" . The best I got is a driver installed and showing in device manager but with message "Universal_Naked_Driver_0.72".
Any help is really appreciated.
Best regards
xda-developers
Where is custom recovery for S6?
xda-developers
Q&A for Sony Xperia E4 Dual ROM for Xolo Q1010i
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Sony Xperia E4 Dual ROM for Xolo Q1010i. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy! :)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Sony Xperia E4 Dual ROM for Xolo Q1010i. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy! :)
xda-developers
Hi guys... I've been using the LGOG E975 for years now , currently I'm running ARTMOD V7 rom on it using the stock kernel.. The only thing that it lacks is lack if storage..
I'll be very grateful if someone could point out the kernels that'll support USB OTG ( of course with the USB Y OTG ) On ARTMOD V7 .. I've used the AK xGenesis gee , and was able to mount external storage using Stick mount.. But it had a lotta bugs like screen brightness was too high even on 0 , glitches etc etc or maybe it justdidn't support the artmod v7..
So i just want you too point out all the kernels that support otg hack on this rom.. Or if there's an alternative then let me know it..
Thanks
Sent from my LG-E975
I'll be very grateful if someone could point out the kernels that'll support USB OTG ( of course with the USB Y OTG ) On ARTMOD V7 .. I've used the AK xGenesis gee , and was able to mount external storage using Stick mount.. But it had a lotta bugs like screen brightness was too high even on 0 , glitches etc etc or maybe it justdidn't support the artmod v7..
So i just want you too point out all the kernels that support otg hack on this rom.. Or if there's an alternative then let me know it..
Thanks
Sent from my LG-E975
xda-developers
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.1.x (Lollipop), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github Repo. And if you would like to contribute to CyanogenMod, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
It Is A Test Build :D Official Nightlies Of CM 12.1 As Per The Cyanogenmod Will Start With in A Week Till Then Enjoy This Rom ;)
Downloads:
CM12.1 - Here
GAPPS for Android 5.1 ( Thanks to @dhacker29 ) - Here
How To Flash- Here
CM11 M12 Release - Here
Bugs- Same As CM12 But Standby Battery Bug Has Been Gone ;) SOT Time Increased ;)
All Credits To This Rom Goes To @leonardoafa He Is The Developer Of This Rom ;)
XDA:DevDB Information
[ROM] [UNOFFICIAL] [LP-5.1] Cyanogenmod 12.1 for Moto X [4/4/2015], ROM for the Moto X
Contributors
Megatron007, leonardoafa
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
Based On: 12.1
Version Information
Status: Testing
Created 2015-04-04
Last Updated 2015-04-04
xda-developers
How can I enable 4k videorecording and 120fps slomo on lollipop official stock rom on D802?
xda-developers
xda-developers
One Click ROOT+TWRP Recovery for Lollipop Stock Firmware
Only for D855
In writing
Thank's to
- 6ril1
-@somboons and his post for the LG G2 : [TOOLS] One Click ROOT+TWRP Recovery for Lollipop Stock Firmware
Download Link: LGG3-D855-OneClickRootRecovery.zip
md5 : 9f0dfaa556e33457163cb7d57ebc6b1d
How to install
1 - Make sure you are enable USB Debuging Mode . See this Method > Enable Debugging Mode
2 - Plug G2 into computer on PTP mode
3 - Extract LGG3-D855-OneClickRootRecovery.zip and run OneClick_ROOT_RECOVERY.bat
4 - Follow the instructions.
5 - Enjoy ROOT+TWRP on Lollipop Firmware
If the phone not recognize, try to switch between MTP and PTP options
xda-developers
Our daughter deleted all of the pics on my wife's phone. She tried to use Dr. Fone, but someone told us that it failed because her phone wasn't rooted. So I tried to root it from this post on cnet:
It failed during the root. Now it says "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again. Which I tried and also failed.
After a lot of heart ache and hours working on it, i have what a friend told me was the right tar file. I have attached the error in Odin.
When I run the tar file in Odin here is what the output screen shows:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I747UCDLK3_I747ATTDLK3_I747UCDLK3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Then my phone screen show this:
SW REV CHECK FAIL : Fused 3 > Binary 0
Not really my area of expertise at all. Any help would be appreciated!!
Thanks,
Brian
It failed during the root. Now it says "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again. Which I tried and also failed.
After a lot of heart ache and hours working on it, i have what a friend told me was the right tar file. I have attached the error in Odin.
When I run the tar file in Odin here is what the output screen shows:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I747UCDLK3_I747ATTDLK3_I747UCDLK3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Then my phone screen show this:
SW REV CHECK FAIL : Fused 3 > Binary 0
Not really my area of expertise at all. Any help would be appreciated!!
Thanks,
Brian
xda-developers
Hello i have o problème in m'y GT i9195
Network its not good
Help me please. 4,4,2
Sent from my GT-I9195 using XDA Free mobile app
Network its not good
Help me please. 4,4,2
Sent from my GT-I9195 using XDA Free mobile app
xda-developers
I was successfully bypassing Tmo tether restriction for a week on my M7 but just today it stopped working (user agent also set to mobile and is necessary). I checked in settings.db and found that the entry for tether_dun_required was not there. I added it back, rebooted the phone and then it was gone again. Any idea what is going on?
xda-developers
Hi,
I'm desperate for help in regards to rooting my device. I have tried using vroot/iroot and kingo root but neither of these have worked. I have attempted many times without success and any help will be greatly appreciated thanks.
Huawei MediaPad 7 Youth 2 S7-721w
Jellybean 4.3
I'm desperate for help in regards to rooting my device. I have tried using vroot/iroot and kingo root but neither of these have worked. I have attempted many times without success and any help will be greatly appreciated thanks.
Huawei MediaPad 7 Youth 2 S7-721w
Jellybean 4.3
xda-developers
I'm trying to find a proper flash APK that works properly with Dolphin or Firefox on Lolipop. I'm on 5.0.2. I'm trying to get streams working. I tried using the hacked kitkat flash apk but I get no sound, and it freezes after a few seconds.
Anybody out there got flash working on their Note 4 using Lolipop?
Anybody out there got flash working on their Note 4 using Lolipop?
xda-developers
XDA:DevDB Information
[ROM] ViperOneM9 1.0.0 • Tweaks, HUB, IconPacks, Themes, OTAs and more • All variants, ROM for the HTC One (M9)
Contributors
j to the 4n, Turge, ivicask, shnizlon,m0narx,hansbert
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.10.x
Version Information
Status: Beta
Current Beta Version: 1.0.0
Beta Release Date: 2015-04-04
Created 2015-04-04
Last Updated 2015-04-04
xda-developers
Hello,
I am kinda new to this and I desperately need some help!
I had a rooted GT-I9300 running on CM11, today I updated it to CM12 and it's working pretty well! Except I have lost root access and I searched all over the net on how to get it back with no luck :crying:
Whenever I open SuperSu the following message pops up "There is no SU binary installed, and SuperSu cannot install it. This is a problem! If you just upgraded to Android 5.0, you need to manually re-root - consult the relevant forums for your device!"
Please help :(
I am kinda new to this and I desperately need some help!
I had a rooted GT-I9300 running on CM11, today I updated it to CM12 and it's working pretty well! Except I have lost root access and I searched all over the net on how to get it back with no luck :crying:
Whenever I open SuperSu the following message pops up "There is no SU binary installed, and SuperSu cannot install it. This is a problem! If you just upgraded to Android 5.0, you need to manually re-root - consult the relevant forums for your device!"
Please help :(
xda-developers
hi
how to s-off htc one m7 wih hboot 1.57, my device is unlocked and rooted, i tried everything.
plz help
thx
how to s-off htc one m7 wih hboot 1.57, my device is unlocked and rooted, i tried everything.
plz help
thx
xda-developers
Hi everyone,
My gf got me a phone as a gift and the weird part it was rooted so i didnt say anything but lately i found out she know alot of things and its like shes reading and knowing everything happening on my phone.. I did factory reset to my phone without backup but yet she still know i have no idea HOW. I found a program called system app working and ruining consuming high amount of data but i cant get rid of it and i have no idea what kind of software im having.
How comes its not possible to remove it when you make factory reset and how can i get rid of it?
Any help feedback i would be appreciate it.
Thank you,
My gf got me a phone as a gift and the weird part it was rooted so i didnt say anything but lately i found out she know alot of things and its like shes reading and knowing everything happening on my phone.. I did factory reset to my phone without backup but yet she still know i have no idea HOW. I found a program called system app working and ruining consuming high amount of data but i cant get rid of it and i have no idea what kind of software im having.
How comes its not possible to remove it when you make factory reset and how can i get rid of it?
Any help feedback i would be appreciate it.
Thank you,
xda-developers
HI Guys,
need help....
I can't access the fastboot mode and if I go to the download mode, it says "Secure boot error".
And the windos device manger says, there is a device called "qhsusb_bulk".
Does any has a solution for that ?
Thx
need help....
I can't access the fastboot mode and if I go to the download mode, it says "Secure boot error".
And the windos device manger says, there is a device called "qhsusb_bulk".
Does any has a solution for that ?
Thx
xda-developers
Please help!
Anytime i receive a notification on my lockscreen.. the screen just stays on and doesnt turn off until I respond back to the notification. How can I fix this? I want it to turn off after 1 or 2 seconds
Anytime i receive a notification on my lockscreen.. the screen just stays on and doesnt turn off until I respond back to the notification. How can I fix this? I want it to turn off after 1 or 2 seconds
xda-developers
Hi,
I am on Chroma ROM and I just downloaded the Playstation app from Play Store, but everytime I open this app, it crashes immediately. Before this I am on Optistock, but there was the same problem. Somebody said that it caused by optimization flags (e.g. -O3 and graphite), and for example on Catalysm, PS app works perfectly.
Is it possible? And are there any solution for this?
Thanks in advance!
I am on Chroma ROM and I just downloaded the Playstation app from Play Store, but everytime I open this app, it crashes immediately. Before this I am on Optistock, but there was the same problem. Somebody said that it caused by optimization flags (e.g. -O3 and graphite), and for example on Catalysm, PS app works perfectly.
Is it possible? And are there any solution for this?
Thanks in advance!
xda-developers
Well, sh#t.
So hey guys, imma show a weird problem that happened two days ago. First off, I replaced the front lcd with the frame(I discovered the one I replaced was older that the othe I have) then, the battery and that's it. I dont have any idea why the flashlight stopped working. Can anyone have hint to address this situation to an end?
Thanks
So hey guys, imma show a weird problem that happened two days ago. First off, I replaced the front lcd with the frame(I discovered the one I replaced was older that the othe I have) then, the battery and that's it. I dont have any idea why the flashlight stopped working. Can anyone have hint to address this situation to an end?
Thanks
xda-developers
First Image Is S4 AT&T ROM Without Video Calling Features
Second Image Is Stock S4 ROM With Video Calling Features
My Question I Need To Add Video Calling Button On AT&T ROM ... Please Help Me
Second Image Is Stock S4 ROM With Video Calling Features
My Question I Need To Add Video Calling Button On AT&T ROM ... Please Help Me
xda-developers
Afternoon all
Got my M9 Wednesday and so far really like it apart from one problem.......
I put my music onto the sd card but when I go to play some songs it play a totally different song and when I forward to the next track it will play a different one again or the same wrong song as last time
I've formatted sd card and converted all tracks to same mp3 format and still not got it all working right.
Anyone any ideas on this?
Thanks
Edit... Using stock rom 1.32.161.15
Got my M9 Wednesday and so far really like it apart from one problem.......
I put my music onto the sd card but when I go to play some songs it play a totally different song and when I forward to the next track it will play a different one again or the same wrong song as last time
I've formatted sd card and converted all tracks to same mp3 format and still not got it all working right.
Anyone any ideas on this?
Thanks
Edit... Using stock rom 1.32.161.15
xda-developers
Got an issue here.
I'm not finding a way out.
Phone status
bootloader is unlocked
Rooted
SU loaded
TWRP loaded
Unable to load any roms or update firmware using any procedure (RUU, SD card, TWRP zip)
I have relocked phone and then tried RUU same result
I have not tried to return to stock yet and start over.
RUU log file attached
TWRP file attached.
Any help will be appreciated
I'm not finding a way out.
Phone status
bootloader is unlocked
Rooted
SU loaded
TWRP loaded
Unable to load any roms or update firmware using any procedure (RUU, SD card, TWRP zip)
I have relocked phone and then tried RUU same result
I have not tried to return to stock yet and start over.
RUU log file attached
TWRP file attached.
Any help will be appreciated
xda-developers
Hello guys, here is my thread for my video tutorials and reviews (all about z3). Im planning to post many video reviews (rom reviews, themes etc..) and video tutorials (how to root z3, install some mods/roms/recovery/etc/etc....) Everything that i will post here will help community! :)
So first im starting with unboxing and hands on of Z3:Review:
COMING SOON
Tutorials:
COMING SOON
Let me know if you need some help or if you want review of your ROM/MOD/APP and things like that.
Mods, please stay patient i will add a lot here .
xda-developers
Has anybody try it on 5.0
xda-developers
Hi there,
the title says is pretty much:
Before Lollipop it was possible to move (the /system part, especially) the dalvik-cache to the cache partition via build.prop setting.
dalvik.vm.dexopt-data-only=0
This moved the system-dalvik to cache while the user-apps part was still at the /data partition. For me this does not seem to work in CM12(.1) anymore. Is the setting renamed?
the title says is pretty much:
Before Lollipop it was possible to move (the /system part, especially) the dalvik-cache to the cache partition via build.prop setting.
dalvik.vm.dexopt-data-only=0
This moved the system-dalvik to cache while the user-apps part was still at the /data partition. For me this does not seem to work in CM12(.1) anymore. Is the setting renamed?
xda-developers
Hello Everyone i am certainly not new to XDA but yes new to this thread! and i really want to know that! should i go for S5 ad i getting it in Rs. 28,000 / $ 450
and i really like this phone but getting a Exynos version and ofcourse as i am from INDIA...and what type of major user are here?! Exynos or snapdragon? and from what region of from exynos...please do tell me :D AS i will be developing for Exynos only!
So, my main question is...is there a development scope in Exynos version! or it is already tooo packed with lots of ROMs or really empty with no resources! and i want to know that...where can i find it's respective thread?
i would really like your suggestion of me being welcomed here or going somewhere else :D!
and i really like this phone but getting a Exynos version and ofcourse as i am from INDIA...and what type of major user are here?! Exynos or snapdragon? and from what region of from exynos...please do tell me :D AS i will be developing for Exynos only!
So, my main question is...is there a development scope in Exynos version! or it is already tooo packed with lots of ROMs or really empty with no resources! and i want to know that...where can i find it's respective thread?
i would really like your suggestion of me being welcomed here or going somewhere else :D!
xda-developers
hi,
i've partitioned my sdcard to fat32(6gb) and ext2(2gb) using aparted. after installing, link2sd, error says, "mount script can not be created. no such device. mount: no such device". i repartition my sdcard using mini partition wizard and set both partition to primary using the same file system as stated earlier, but still the error occur. i tried to manually create mount file /etc/init.d/11link2sd, then change then chmod to 777 using terminal emulator(busy box is installed).
11link2sd contains:
mount -t ext2 -o rw /dev/block/mmcblk1p2 /data/sdext2 (i also tried to execute it this command in terminal emulator, but it says, device does not exist). /data/sdext2 folder exist.
other 11link2sd scripts that i have tried also doesn't work.
-------------------------------------------------
#!/system/bin/sh
#added by link2sd
LOG=/data/link2sd-11link2sd.log
echo "$(date) mounting..." > $LOG
# Leave out "/external_sd" if you are using your internal SD card.
# And check the path, it may be different for your ROM.
mount -o bind /dev/block/mmcblk1p2 /data/sdext2 1>>$LOG 2>>$LOG
mount >> $LOG
echo "$(date) mount finished" >> $LOG
int.d folder is not present so i created it manually(as stated in some post).
i also installed Smanager to run the script at boot.
when i do cat /proc/partitions, it shows that mmcblk1p2(2nd partition of sdcard).
a youtube video says that converting link2sd to system app will fix the problem, however i can not convert link2sd to system app. (i removed some system apps to free up space).
device: rooted myphone uno (android 5.1 lollipop).
thanks.
i've partitioned my sdcard to fat32(6gb) and ext2(2gb) using aparted. after installing, link2sd, error says, "mount script can not be created. no such device. mount: no such device". i repartition my sdcard using mini partition wizard and set both partition to primary using the same file system as stated earlier, but still the error occur. i tried to manually create mount file /etc/init.d/11link2sd, then change then chmod to 777 using terminal emulator(busy box is installed).
11link2sd contains:
mount -t ext2 -o rw /dev/block/mmcblk1p2 /data/sdext2 (i also tried to execute it this command in terminal emulator, but it says, device does not exist). /data/sdext2 folder exist.
other 11link2sd scripts that i have tried also doesn't work.
-------------------------------------------------
#!/system/bin/sh
#added by link2sd
LOG=/data/link2sd-11link2sd.log
echo "$(date) mounting..." > $LOG
# Leave out "/external_sd" if you are using your internal SD card.
# And check the path, it may be different for your ROM.
mount -o bind /dev/block/mmcblk1p2 /data/sdext2 1>>$LOG 2>>$LOG
mount >> $LOG
echo "$(date) mount finished" >> $LOG
int.d folder is not present so i created it manually(as stated in some post).
i also installed Smanager to run the script at boot.
when i do cat /proc/partitions, it shows that mmcblk1p2(2nd partition of sdcard).
a youtube video says that converting link2sd to system app will fix the problem, however i can not convert link2sd to system app. (i removed some system apps to free up space).
device: rooted myphone uno (android 5.1 lollipop).
thanks.
xda-developers
here is the link
http://www.romjd.com/Rom/Detail/64680
http://www.romjd.com/Rom/Detail/64680
xda-developers
I've noticed quite a few aosp based Roms for d855 that are not for d851. Is it possible to use them if we flashed a d851 kernel right after? Or is there more to it then that? Since hardware is basicly the same would it work?
xda-developers
i have 831c (htc). I tried unlocking all bands but i stopped at the last moment. After a day the phone had no signal. i tried all things cleaning sim removing rebooting etc. The same sim works fine on other phones. The phone is factory unlocked and used to be locked on sprint. It keeps on asking for activation though after avoiding it goes away. Whenever i put the sim in , in cdma only or lte/cdma mode. It shows no sim. and when i use gsm/utms only it says invalid sim contact customer service. I have shifted to asia. Help
xda-developers
Hey there!
Its a nightly build released by Xiaomi several days ago by OTA.
Some users reported that they didn't got this update via OTA, so here it is ;)
DOWNLOAD THE ATTACHMENT BELOW ;):cowboy::D
Its a nightly build released by Xiaomi several days ago by OTA.
Some users reported that they didn't got this update via OTA, so here it is ;)
DOWNLOAD THE ATTACHMENT BELOW ;):cowboy::D
xda-developers
I just flashed OxygenOS and now file managers don't detect any internal storage. TWRP detects it just fine.
Any ideas?
Any ideas?
xda-developers
hi
Please suggest me a best audio mod for cm 12 , i tried walkman port from ibanez7 , but it won't work (lot of audio glitches )
Please suggest me a best audio mod for cm 12 , i tried walkman port from ibanez7 , but it won't work (lot of audio glitches )
xda-developers
Hello, as the title says, i installed accidentally serrano3g cwm instead of serranoltexx one. I have an i9195, i want to get back to stock rom, i tried flashing with odin, but when i connected the phone to computer it was only charging, nothing more, no usb data storage popup. Ideas to fix this?
xda-developers
Mods: Please delete this thread.
xda-developers
Hello. I updated Camera Extensions like AR effect, Live on Youtube, Background Defocus etc. After the update, these extensions appeared in launcher, among other apps. I want to remove them from the launcher, not disabling or removing the updates. How can I do that?
(Sony Xperia Z3 Compact D5803)
(Sony Xperia Z3 Compact D5803)
xda-developers
Is samsung pay gonna be added or eventually an app will be available in google play or galaxy store? I just dont see it on the phone just yet.
xda-developers
My N3 suddenly not detecting qny SIM on Dr.Ketans super Lollipop ROM While I enjoyed using it for couple of months already without any problems this is like an unexpected shocker. I tried the following without any luck.:
# Signal detects normally for a minute after a cold reboot. I can even make calls until a minute and then SIM fails with a big crossed circle on the signal and it's the same with any SIM I try.
# Hot boot, Safemode, Wipe cache from recovery doesn't work.
# Hot boot, Safe mood, Recovery cache wipe not works
# Removing SD card, Toggling radios nothing works.
Should I try flashing the ROM over this to see if it can recover on the modem or do you see its a hardware issue? But why it works for a minute on restart????
# Signal detects normally for a minute after a cold reboot. I can even make calls until a minute and then SIM fails with a big crossed circle on the signal and it's the same with any SIM I try.
# Hot boot, Safemode, Wipe cache from recovery doesn't work.
# Hot boot, Safe mood, Recovery cache wipe not works
# Removing SD card, Toggling radios nothing works.
Should I try flashing the ROM over this to see if it can recover on the modem or do you see its a hardware issue? But why it works for a minute on restart????
xda-developers
I'm using the Samsung keyboard on my Note 4 with two languages enabled (English and German)
Sadly the autocorrect and word learning seems to unified which means that when I write in English (with the English language selected on the space bar ) I still get many german word offered by autocorrect.
Also learnt words seem to be stored in only one dictionary; not a pet-language one
But many words are similar (in terms of swiping path etc) between the two languages so that autocorrect's offerings are often useless. (Bettet instead of better)
The same applies for the handwriting input as that seems to be part of the same keyboard implementation. ..
I'd like it much better if it only used the selected language for word suggestions and kept separate dictionaries for leant words. .I can live with having to store some entries (like names etc) twice if I must
So is there a way to accomplish that?
Or is there a replacement keyboard that works as well with handwriting and swiping but which has separate dictionaries etc?
Sadly the autocorrect and word learning seems to unified which means that when I write in English (with the English language selected on the space bar ) I still get many german word offered by autocorrect.
Also learnt words seem to be stored in only one dictionary; not a pet-language one
But many words are similar (in terms of swiping path etc) between the two languages so that autocorrect's offerings are often useless. (Bettet instead of better)
The same applies for the handwriting input as that seems to be part of the same keyboard implementation. ..
I'd like it much better if it only used the selected language for word suggestions and kept separate dictionaries for leant words. .I can live with having to store some entries (like names etc) twice if I must
So is there a way to accomplish that?
Or is there a replacement keyboard that works as well with handwriting and swiping but which has separate dictionaries etc?
xda-developers
Hello all, I am here with a super list of boot animations. I collected the gif images from internet & made a collection of boot animations. Some boot animations are also collected from various sources. All are tested & working fine on my Micromax Canvas A1 (android one 480x854). Please post here or PM me to let me know if anything is not working and I'll get to it ASAP! Feel free to see if these work on other Device’s and at your Own Risk. This took a VERY LONG time to create or collect these, so I hope you all enjoy it!
"Thanks" is optional of course, but always appreciated!
instructions:
extract-> go to extracted folder-> cut & paste-> system/media-> change permissions to rw-r-r (see screenshot below) Reboot and Enjoy!
"Thanks" is optional of course, but always appreciated!
instructions:
extract-> go to extracted folder-> cut & paste-> system/media-> change permissions to rw-r-r (see screenshot below) Reboot and Enjoy!
For those of you who still can't figure out how to change your boot animation, watch the video below:
xda-developers
WinDirBkUp-WinPE is intended to be run on Windows 8.x / Windows 10.x machines!
WinDirBkUp-WinPE is a workbench I initially created for myself to store a backup of <drive>\Windows folder into a Windows PE that will restore <drive>\Windows folder at PC's boot time.
The package includes components provided by Microsoft with their "Windows Kits" for Windows 8.1, especially the "Assessment and Deployment Kit".
Since the backup made is exactly the mirrored copy of the <drive>\Windows folder and thus contains the configuration of the Windows OS, after restoring the computer from that backup image, the computer comes back to the state at which the WinPE image was created.
Credits: Wangdera Corporation, Microsoft Corporation et al.
xda-developers
Hello,
I have a Samsung note Edge n915FY. Rooted with CWM.
When i install Xposed framwork and update binery Google Play behaving strange. I Can download any app, but it stops right before install process starts. Then it takes like 30-60 sek before it starts to install.
Any other with the same problem?
I have tried many things:
- Delete cache
- Reboot
- Delete Data (Play store)
Hoping someone can help!
Cheers!
I have a Samsung note Edge n915FY. Rooted with CWM.
When i install Xposed framwork and update binery Google Play behaving strange. I Can download any app, but it stops right before install process starts. Then it takes like 30-60 sek before it starts to install.
Any other with the same problem?
I have tried many things:
- Delete cache
- Reboot
- Delete Data (Play store)
Hoping someone can help!
Cheers!
xda-developers
i was traying to revert to stock by following the thread of mike1989 and apparently i did something wrong, im on s-on relocked bootloader and flashed a stock rom odexed (also by mike1989) and flashed stock recovery after that, now the phone cant recive any OTA's since ive flashed the 4.4.4 rom (world wide english version) and my phone is from france (CID: ORANG202) and i cant re-unlock the bootloader to flash a custom recovery
i also tried to flash a RUU (with the same CID) but no succes it says :FAILED (remote: 12 signature verify fail)
i will be very thankful if anyone help me!
i also tried to flash a RUU (with the same CID) but no succes it says :FAILED (remote: 12 signature verify fail)
i will be very thankful if anyone help me!
xda-developers
Hi
I was looking for a way to unlock the phone for free and I found one over here
http://www.rimweb.in/forums/topic/37...print-for-gsm/
After this I got an error : VDM Client has stopped unexpectedly
So to fix this I installed Insertcoin kitkat rom and it worked
You can try other roms like badBoyz or ViperOne
I was looking for a way to unlock the phone for free and I found one over here
http://www.rimweb.in/forums/topic/37...print-for-gsm/
Quote:
Requirements: 1. This tutorial is independent of Android version whether it may be 4.4.2 or 4.4.3. Works on both stock and sense based custom ROM's. (Not tested on AOKP ROM's.). Works on both s-off and s-on devices. 2. You need to be rooted and bootloader needs to be unlocked. Here are the links that would show you how to do it. http://theunlockr.co...t-method-video/ '> http://theunlockr.co...t-method-video/ Or http://htconeroot.co...oot-htc-one-m8/ 3. Once you are rooted download the following zip file and copy it to the internal memory of your m8. https://www.dropbox....UNLOCK.zip?dl=0 '> https://www.dropbox....UNLOCK.zip?dl=0 4. Download and install Terminal from play store. 5. Switch off the handset and boot to fastest.(By holding volume down and power button together ). 6. Once you are on fastboot screen navigate to recovery using volume buttons and press power button to boot to recovery. 7. One you are in recovery click on install (I'm presuming you installed twrp recovery, if not then do it according to that recovery). Now locate SIM_UNLOCK. zip and flash it. Reboot system after successful flash. 8. On Reboot:eek:pen the Terminal Emulator from the app drawer 9. Type - su 10. Hit enter on your keyboard 11. After you see the # type this- am start com.redbend.vdmc/com.htc.omadm.test.TestMainActivity 12. Hit the enter key 13. Next you should see a menu listing 3 options as follows: GUI API ROAMING OPTIONS 14. Select API 15. Once the API menu comes up, scroll down until you see - sim lock 16. Tap- sim lock. Wait until the gray highlight goes away and turns black again 17. Reboot and you are done. 18. If you see you that you have no network then dial *#*#4636#*#*. A menu will pop up. Select phone information then scroll down until you see 'select preferred network type'. Change it to WCDMA preferred and that is. Now your network should pop-up. This is permanent unlock and you can update your Android version in future. |
So to fix this I installed Insertcoin kitkat rom and it worked
You can try other roms like badBoyz or ViperOne
xda-developers
Hi all.. Quick question.
I've just started the process of trying to root my One Max (international) and everything has gone smoothly with unlocking the bootloader etc, and i've flashed a CWM image to it as my recovery, but once i've rebooted, volume down and select recovery, hit power, it says entering recovery but then screen goes off, waits about 20-30 seconds and boots up as normal.. Is the CWM image file wrong? And if so, can i just redo the process of flashing the rom again the same way, or do i need to uninstall this image before i can? Does any new image not just overwrite?
I'm just a little frustrated at this point because it's now unlocked and tampered yet i have no root access.
I've just started the process of trying to root my One Max (international) and everything has gone smoothly with unlocking the bootloader etc, and i've flashed a CWM image to it as my recovery, but once i've rebooted, volume down and select recovery, hit power, it says entering recovery but then screen goes off, waits about 20-30 seconds and boots up as normal.. Is the CWM image file wrong? And if so, can i just redo the process of flashing the rom again the same way, or do i need to uninstall this image before i can? Does any new image not just overwrite?
I'm just a little frustrated at this point because it's now unlocked and tampered yet i have no root access.
xda-developers
Free Version
Paid Version
Please try it out, write a review, provide feedback, etc. This is my first dev project outside of work crap. It's a simple enough concept: classic block breaker game, but the paddle and physics are replaced b pinball flippers and real world physics (realistic gravity).
If you are on a 7 or 10 inch tablet, and could possibly provide me with some screen shots so I can see how it translates to a larger display, that would be SWEEEEEET.
I'm pretty proud of this, hope you folks like it.:laugh:
Paid Version
Please try it out, write a review, provide feedback, etc. This is my first dev project outside of work crap. It's a simple enough concept: classic block breaker game, but the paddle and physics are replaced b pinball flippers and real world physics (realistic gravity).
If you are on a 7 or 10 inch tablet, and could possibly provide me with some screen shots so I can see how it translates to a larger display, that would be SWEEEEEET.
I'm pretty proud of this, hope you folks like it.:laugh:
xda-developers
Hello XDA,
Today I'm going to show you how to work with/convert the .pkm and .atc image files that are included in system apks on recent devices. It's been about a month since I've looked into these formats, so if anybody has since come up with any better/alternative methods, please share them here.
Let's begin...
.pkm
.pkm files are actually a type of ETC1_RGB8 textures. The reason manufacturers are starting to use them, is because they are fully supported by Android, and with the OpenGL ES platform that Android runs, they offer significant overhead savings vs conventional image formats. A lot of people (devs included) probably haven't realized it, but there is actually a tool that comes bundled with the Android SDK for creating .pkm textures. It's called etc1tool, and is a command line utility. Etc1tool is capable itself of converting .pkm files to .png, but unfortunately all the ones I've come across in pre-existing apks are not able to be converted this way. That would be too easy, right? So, here's what we do instead:
-First, you're going to need to download and install Mali GPU Texture Compression Tool from HERE.
-Once you've got it all set up, open it up, go to File > Open, and open up a .pkm file (or several, as it can do batch processing).
-Now, click on the .pkm file you just opened, in the left-hand pane to select it. You should see the image.
-Next, click on the yellow icon towards the upper right of the screen.
-In the window that pops up, copy the settings I have here. You can change the directory (it's only going to store a temp file anyway), but everything else must match.
-Click OK, let it do its' thing, and you should see a screen similar to this:
-Now, you're going to click on your image(s) in the left-hand pane to select them again, then click on the blue save icon towards the upper right.
-Save them to whatever directory, and with whatever extension you'd like (most likely .png). Now, the standard ETC1 format doesn't handle alpha values, and the existing .pkms seem to have been encoded using some proprietary method that preserves the alpha channel. When you save your image from Mali, it will not save the alpha values, despite the preview having them. As a result, your .png will have a black background, similar to this:
From here, though, you at least have a standard .png image, which you can then open with Photoshop or Gimp and easily remove the black background.
-If for some reason you'd like to create your own .pkm file(s) from existing images, navigate in command prompt to the your Android SDK > Tools directory, then use the following:
.atc
.atc files aren't going to be as common as .pkm, as they are a proprietary format and can only be used on device with a Qualcomm Adreno chipset. Just like .pkm files, they offer significant gains in overhead performance compared to standard image formats, but they are a pain when you're trying to theme an app that's full of them. Let's begin...
-Start off by downloading the ASTC Evaluation Codec found HERE. This one is going to be a zip, rather than an installable program, so download it and extract it wherever you wish. Once extracted, find the location of 'astcenc' (the folder names are odd, and differ depending on your OS).
-Once you've located it, open up command prompt, and navigate to that folder.
-Like etc1tool, the ASTC Codec is capable of converting directly to .png, but also like the .pkm files, it doesn't work in this case. You can try, but the result will be unusable, so don't waste your time. Instead, we're going to convert to .tga.
-So, in command prompt, use the following to decode the .atc to a more usable .tga:
-Unlike .pkm files and Mali, this will preserve any existing transparency, but there's a catch (there's always a catch). The resulting .tga file will be upside down.
-Fortunately, this is nothing more than a minor inconvenience lol. So, once you have your .tga file, open it up in Photoshop or Gimp, flip it, and save as .png, and you should be all set.
-If for some reason you wanted to create a new .atc file, the codec can be used for that as well. I forget the command, and documentation is very hard to find, but if you use the following, you should be able to go from there:
Be aware, that there is absolutely no need to recreate any of these special formats. You can simply delete the originals and replace them with .png files of the same name, and they'll work just fine in any apk, and then you won't have to worry about it in the future. Anyway, I hope some of you learned something and find this useful....
~morningstar
Today I'm going to show you how to work with/convert the .pkm and .atc image files that are included in system apks on recent devices. It's been about a month since I've looked into these formats, so if anybody has since come up with any better/alternative methods, please share them here.
Let's begin...
.pkm
.pkm files are actually a type of ETC1_RGB8 textures. The reason manufacturers are starting to use them, is because they are fully supported by Android, and with the OpenGL ES platform that Android runs, they offer significant overhead savings vs conventional image formats. A lot of people (devs included) probably haven't realized it, but there is actually a tool that comes bundled with the Android SDK for creating .pkm textures. It's called etc1tool, and is a command line utility. Etc1tool is capable itself of converting .pkm files to .png, but unfortunately all the ones I've come across in pre-existing apks are not able to be converted this way. That would be too easy, right? So, here's what we do instead:
-First, you're going to need to download and install Mali GPU Texture Compression Tool from HERE.
-Once you've got it all set up, open it up, go to File > Open, and open up a .pkm file (or several, as it can do batch processing).
-Now, click on the .pkm file you just opened, in the left-hand pane to select it. You should see the image.
-Next, click on the yellow icon towards the upper right of the screen.
-In the window that pops up, copy the settings I have here. You can change the directory (it's only going to store a temp file anyway), but everything else must match.
-Click OK, let it do its' thing, and you should see a screen similar to this:
-Now, you're going to click on your image(s) in the left-hand pane to select them again, then click on the blue save icon towards the upper right.
-Save them to whatever directory, and with whatever extension you'd like (most likely .png). Now, the standard ETC1 format doesn't handle alpha values, and the existing .pkms seem to have been encoded using some proprietary method that preserves the alpha channel. When you save your image from Mali, it will not save the alpha values, despite the preview having them. As a result, your .png will have a black background, similar to this:
From here, though, you at least have a standard .png image, which you can then open with Photoshop or Gimp and easily remove the black background.
-If for some reason you'd like to create your own .pkm file(s) from existing images, navigate in command prompt to the your Android SDK > Tools directory, then use the following:
Code:
etc1tool pathtoinputfile.png --encode -o pathtooutputfile.pkm.atc
.atc files aren't going to be as common as .pkm, as they are a proprietary format and can only be used on device with a Qualcomm Adreno chipset. Just like .pkm files, they offer significant gains in overhead performance compared to standard image formats, but they are a pain when you're trying to theme an app that's full of them. Let's begin...
-Start off by downloading the ASTC Evaluation Codec found HERE. This one is going to be a zip, rather than an installable program, so download it and extract it wherever you wish. Once extracted, find the location of 'astcenc' (the folder names are odd, and differ depending on your OS).
-Once you've located it, open up command prompt, and navigate to that folder.
-Like etc1tool, the ASTC Codec is capable of converting directly to .png, but also like the .pkm files, it doesn't work in this case. You can try, but the result will be unusable, so don't waste your time. Instead, we're going to convert to .tga.
-So, in command prompt, use the following to decode the .atc to a more usable .tga:
Code:
astcenc -d pathtoinputfile.atc pathtooutputfile.tga-Unlike .pkm files and Mali, this will preserve any existing transparency, but there's a catch (there's always a catch). The resulting .tga file will be upside down.
-Fortunately, this is nothing more than a minor inconvenience lol. So, once you have your .tga file, open it up in Photoshop or Gimp, flip it, and save as .png, and you should be all set.
-If for some reason you wanted to create a new .atc file, the codec can be used for that as well. I forget the command, and documentation is very hard to find, but if you use the following, you should be able to go from there:
Code:
astcenc -help~morningstar
xda-developers
How Can i install the all AR effect, super video effect, and creative effect of xperia z2 features in xperia e JB..
With more comfertable and stable to android 4.1.1 JB
And how to install that all effect in step by step
Can Any one tell me how to do......
And Give me the links also
Thanks...
Sent from my C1505 using XDA Premium 4 mobile app
With more comfertable and stable to android 4.1.1 JB
And how to install that all effect in step by step
Can Any one tell me how to do......
And Give me the links also
Thanks...
Sent from my C1505 using XDA Premium 4 mobile app
xda-developers
Just saw it was released, who's porting it to the nexus 6? Sucks PA is dead for now but I'm sure oxygen will be good
xda-developers
STOCK ROM
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
*You getting divorced because your wife didn't like wallpaper
*Your Dog biting you because you didn't feed it as u loved my ROM and forgot everything
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*/Credits first
@==dp== (thanks a lot for the backup)
@lost101
What is this?
This is zip of stock lollipop(5.1) of the google play edition.It has only system,boot.img so there is no risk of bricking.
It means ur bootloader won't be upgraded
It means ur bootloader won't be upgraded
Why should I install this?
If u want to get the best experience of lollipop aka nexus experience.
5.0.2 was a failure and everyone know it.
This zip is 5.1 and its so smooth that you will die.
Additionally I won;t upgrade your bootloader sp there is no risk of bricks nad u can flash your stock firmware like a boss
Will this work in my device?
This zip will not work on XT1033 so If there is any XT1033 user reading this,thank you for reading upto here and now u can go back and search for custom roms.
This should probably work on XT1032.
I loved this ROM what do u want in return?
-I don't want money
-I don't want thanks also (just kidding)
-U can't give what I want
-Thank you for asking
This zip will not work on XT1033 so If there is any XT1033 user reading this,thank you for reading upto here and now u can go back and search for custom roms.
This should probably work on XT1032.
I loved this ROM what do u want in return?
-I don't want money
-I don't want thanks also (just kidding)
-U can't give what I want
-Thank you for asking
FEATURES
Debloated
Pre rooted? (needs testing)
Viper's audio
boots with google logo
Pre rooted? (needs testing)
Viper's audio
boots with google logo
How to install?
Boot into recovery(TWRP/Philz/Cwm)
Wipe data,cache,dalvik/ART cache
Install zip from sd card
Reboot
DOWNLOADS
Wipe data,cache,dalvik/ART cache
Install zip from sd card
Reboot
DOWNLOADS
Older version
xda-developers